We are going to take a look at Tire Cupping/Wear – Causes and Correction in our article today. Just like every other component and parts of your car, you should always care for your tires. The importance of constantly having the maintenance of your tires in mind will help boost the overall performance of your car and you would also get good service in return.
The negligence of maintaining your tires will leave them exposed to quick cupping or wearing off. This is why you need to be vigilant and attentive enough to them for longevity purposes.
What Does It Mean For Tires To Start Cupping?
The simple meaning of tire cupping is when tires start to wear. Tires wear for a host of reasons including of course when they are not properly maintained.
If you notice any signs of your tires acting or looking funny, they are calling for your attention and you should do the needful as soon as possible.
Read also; Signs Of Bad Wheel Bearings And Corrections
What Does Tire Cupping/wear Look Like?
This is a question a lot of drivers out there do not know the answer to. If you happen to be one of those drivers, then not to worry, as you will understand better as you read further.
If your tire starts cupping, you will notice a very obvious reaction regarding the way they move. It begins to move and bounce abnormally as it would have lost the normal shape. It would have slight or large bumps in which would have a direct impact on its movement.
Your tire cupping is a big hint that there are some factors or other components in your car that are affecting it negatively. It then begins to have bad modes of communication with the road as it loses balance. Cupping can also be called tire scalloping and it happens more frequently than people know of.
Cupped tires send you signs by generating noise when you drive at increased speeds. You may be convinced that the sound is that of a worn wheel bearing if you are not certain what’s wrong. Also, at lower speeds, you would notice a harsher ride.
Reasons For Tires Cupping/wear
There are three basic reasons responsible for your tires getting cupped. It could either be that your tire rim is bent, the suspension parts are worn, low-quality tires or the tires are out of balance.
- Bent Rim: This is a common culprit that aids the cupping of tires fast. Your tire rims get bent faster if you drive through potholes more or too often. Noticing a bent rum is usually a bit hard when looking from the outside, as compared to how visible it usually is on the lift.
You may replace bent rims, but they can also be fixed so you can save yourself some energy and money.
- Worn Suspension Parts: A really quick way your tire can wear in some spots faster than the others is if your car keeps bouncing sideways or up and down. This is usually caused by bad struts or shocks.
If this happens, your car creates a disconnection with the road for a short time and at a later time, the rubber in the tire begins to have dips. This problem usually gets escalated if you keep driving your car through bumpy toads or over speed bumps.
- Low-Quality Tires: You can’t attach low-quality tires to your car and expect to have high performance in return. This is why you should carry out findings properly to be sure that if you’re buying any new tire, you’re buying a very good one.
You should avoid buying cheap tires just because you want to boycott spending more for better quality. There are more risks attached to using low-quality tires than the tires just cupping.
- Tires Out Of Balance: There is a huge possibility that your tire balance is not well-placed if you’re driving and your wheel is shaking. Another notification you can get is when you feel some vibrations through the seat.
Sometimes, you get these signs when you just recently checked for your tire balance and you may just feel it can’t be a tire balance problem since you just recently checked. But you should still check because regardless of when you checked last, snow, dirt, mud, and other particles could get all stored up in your tire and the imbalance issue could arise.
Can A Cupped Tire Be Repaired? – Tire Cupping/wear Corrections
Even though you can fish out and rectify the issue directly from the cause, you can’t permanently abolish the wear itself. You can only fix the cause of the problem if it is not severe. If it is, you will need to replace the entire tire.
The following are the steps you need to follow to locate the problem cause.
- Put your car on the emergency brake after you finish parking it.
- Check and look through the tread of all four tires to locate the cupped one.
- Get the vehicle in motion (either by driving mildly or pushing it) and examine how the bouncing works. If any of the tires does not move or bounce moderately, then you have found it. If all the tires bounce moderately, then maybe the fault is from the shocker absorbers.
- Wheel misalignment could also be the cause. Hence, you should inspect all the tires, both the rear ones and the front ones.
You should take your car to experts so they can carry out a professional inspection on it. They would also be in the best position to fix it the best way if the situation demands.
Read also; Why are my back tyre cupping
If you notice that your car is showing symptoms associated with cupped tires, observe the suspension system. Always be vigilant and quick to take your car for inspection once you notice any deficiency at all. The earlier you act, the better for both you and your car.
Check for your tire inflation monthly, and the overall condition of your tires. And lastly, whenever you want to buy new tires, ensure that you buy the ones that are of top quality. They may cost more but in the long run, it’s a decision you won’t ever regret.
Hope you enjoyed reading our article on Tire Cupping/Wear – Causes and Correction. Please check back for more informative articles like this