Can You Ceramic Coat Vinyl Wrap? Yes, you can ceramic coat your vinyl wrap. This is a common question and the short answer is yes. But let’s go a little more in depth so you know why this is important and how to do it.
Ceramic coating is a type of paint, but it’s not exactly like any other kind of paint. If you’re unfamiliar with ceramic coatings, the most obvious difference is that they are liquid and applied by hand instead of sprayed or rolled on. They can also be used to create a glass-like finish on your car’s exterior, which is what we’ll focus on here.
As far as vinyl wrap goes, this refers to removable vinyl stickers that adhere to your surface and come in many different designs and colors. These materials are typically used for advertising purposes because they’re fairly cheap and easy for businesses or individuals to install themselves—and then remove if necessary without damaging the underlying surface (although some damage will occur).
Read also: How Much Does a Car Battery Cost?
A ceramic coating will protect your car from UV rays up to 99% more than uncoated vehicles do; it will also make it much easier for police officers or other authorities looking into your vehicle’s history since there will be fewer places where dirt could hide between coats (e.g., behind bumper edges).
These coatings tend not last very long either though; depending on how hard you drive your car every day along with its exposure level outside may determine how long before needing another coat applied again! This same principle applies when using any sort of protective barrier like waxes/sealants too so don’t expect results lasting anywhere near forever without maintenance work being done regularly.”
You may be wondering if there’s the possibility that ceramic coating can ruin your vinyl wrap. Ceramic coating may not be a good idea for all vinyl wraps.
You may be wondering if there’s the possibility that ceramic coating can ruin your vinyl wrap. Ceramic coating may not be a good idea for all vinyl wraps. If you have a low-end or long-term quality vinyl wrap, Ceramic coating may damage or crack it, leaving you with an unsightly and unusable product. However, if you have high-quality vinyl wrap that has been professionally applied to your car or boat then it is safe to apply ceramic coating over the top of it.
In order to determine whether ceramic coating would be appropriate for your particular vehicle or boat, consider these factors:
- How old is my vehicle? If it’s less than 6 months old then chances are good that applying ceramic coating will not cause any problems whatsoever.
- Has my vehicle been painted before? If so then there could potentially be some issues with applying more paint over what was already on there before as well as having moisture trapped inside causing rusting on certain parts such as undercarriages (the part below where occupants sit).
Vinyl wraps, particularly high-quality ones, have a very smooth surface which needs to be prepared before ceramic coating can be applied.
In order to be ready for ceramic coating, the vinyl wrap needs to be clean. A clean surface is one that is free of any dirt and debris, as well as free of any imperfections in the vinyl itself. This means you’ll need to thoroughly clean your car before applying ceramic coating.
You’ll also want your car’s surface to be dry. While this may seem obvious, it’s important to note that most people apply their first coat too soon after washing their cars—and this can cause problems down the line when trying to apply additional coats.
Some cheap vinyl wraps have imperfections that need to be corrected before you can proceed with ceramic coating.
The imperfections can vary from wrap to wrap, but here are some of the most common imperfections that vinyl wraps from China will have:
- Spelling errors in the text on the wrap
- Poorly cut letters or graphics that leave extra material sticking out of your car’s body. These can be trimmed down with a sharp pair of scissors, and then sanded smooth before going forward with ceramic coating.
- Air bubbles trapped underneath the vinyl. This is an easy fix! Simply use a heat gun to gently warm up the surface, and then gently press out any air bubbles with your fingers (or small spatula).
You could end up ruining your vinyl wrap if you don’t properly prepare it for ceramic coating first.
There are several different ways to prepare your vinyl wrap before applying the ceramic coating. You can clean it by hand with soap and water, or you can use a heat gun to remove any imperfections. You could also use a solvent to remove any imperfections, or sanding block to remove any imperfections in the surface of your vinyl wrap.
Proper care and preparation are essential in achieving great results with ceramic coating on vinyl wrap.
Proper care and preparation are essential in achieving great results with ceramic coating on vinyl wrap. Before we begin, here’s a quick checklist to make sure you have everything in place:
- Make sure your vehicle is prepped correctly. The surface needs to be free of waxes and polishes, so make sure all the old products are removed from the surface before you start coating it with ceramic paint.
- Use high-quality materials; don’t cheap out on your vinyl wrap or glass etching kit!
- Don’t use damaged vinyl wraps that have been exposed to UV light or improper installation; this can lead to bubbling and cracking during the application process. If any bubbles appear after application of a new layer, gently sand off any loose material then reapply another coat over top of it until no more bubbles appear before proceeding with the etching process (this may take several coats).
Conclusion
If you have any concerns or questions regarding ceramic coating vinyl wrap on your car, it’s best to consult an expert to help you decide. If you don’t know where to start, contact us for a free quote and we can help walk you through the process so that you can make the most informed decision for your needs!